Are you looking for a new way to save money and try something different? Refilling your IGET 3500 with vape juice can be a great option.
So, how to refill IGET Bar? Here are 7 simple steps to guide you through the process.
However, keep in mind that this guide is for reference only. As this behaviour has safety hazards, please assume all risks.
- Use pliers to pull the bottom cover back and forth
- Remove the battery and tank
- Remove the rubber plug from the top of the filling port
- Slowly fill the tank with e-liquid
- Seal the filling hole with the rubber plug
- Reassemble the vape
- Let the e-liquid sit for 5-10 minutes
For additional information on how to choose the right liquid to fill your vape, please read the following article for details.
Introduction
Filling an IGET Vape Bar is an eco-friendly and money-saving thing to do. It saves you money on frequent purchases of disposable vapes.
But more importantly, you will try a brand new flavour each time you fill it.
However, one thing to keep in mind is that the IGET Vape Bar is a disposable vape and is not required to be filled.
This means it is not recommended to be opened, so when you try the steps provided in this guide, do so at your own risk. This guide only serves as a reference.
So, how do you fill IGET Bar Vapes? To provide a real and satisfying answer, we consulted a professional vape repairman for advice.
Then we also watched many videos on YouTube and went to Reddit forums to collect opinions and feedback from netizens.
It took us almost a month to prepare the tools for filling, choose the right vape juice, and test the filling steps.
Seeing this, are you already curious about the process of how to refill the Vape IGET Bar? Then, without further delay, let’s get started with the main text!
Tool Preparation Before Filling
I know you can’t wait to fill the IGET Bar now, but in order for the later steps to progress more smoothly, we need to prepare the following tools in advance:
Tools | Function |
---|---|
A pair of pliers | Used to open the bottom cover of the Bar IGET |
Several clean paper towels | Wrap the device to prevent slippage and wipe up spills during the filling process. |
A bottle of your favorite vape juice | Experience a different vape flavour |
How To Refill IGET Bar?
To ensure that you can open the IGET 3500 puffs and fill them without any worries, we would like to reiterate that this filling process comes with some risks. Please try it only after due consideration.
For the first step of filling, we need to use pliers to open the vape.
Therefore, please hold the Bar IGET device firmly with one hand, grasp the pliers with the other hand, and squeeze the bottom cover firmly with the other hand.
If the device often slips when opened, you can wrap it with a paper towel, increasing the friction to some extent.
After several repetitions of squeezing and pulling the cover back and forth, the groove between the shell and the cover will gradually increase in size.
When you can clearly see the internal parts, that means you are not far from success.
However, please note that scratches on the bottom of the device are inevitable due to the back-and-forth pulling of hard squeezing.
Once the cover has been successfully opened, you can use the tips of the pliers to gently remove the battery and tank inside and set them aside.
But remember to be gentle with your movements, as the battery parts are very fragile.
To prevent e-liquid leakage, the IGET Bars are equipped with a rubber stopper at the filling port.
You only need to gently remove the rubber plug to see the structure of the filling port.
At this point, take out a bottle of your favourite vape juice. Next, place the tip of the e-liquid bottle into the fill port on the side.
But remember not to fill the centre hole with liquid. The hole in the centre is called the “chimney, ” an air passage connecting to the mouthpiece.
If you fill this with e-liquid, we’ll accidentally ingest it.
Next, to prevent air bubbles from appearing in the tank where the e-liquid is being filled, we can slightly tilt the e-liquid bottle.
Then, slowly fill the tank up to three-quarters of the way. Don’t overfill at this point.
We need to leave a little space at the top of the tank to help create a vacuum inside. This will prevent the e-liquid from leaking when we vape.
If air bubbles form in the tank when filling too quickly, gently shake it to eliminate the bubbles.
Once you have finished filling the tank, be sure to seal the filling hole with the rubber plug to prevent the liquid from leaking later.
To prevent e-liquid from leaking and piling up near the tank, we need to wipe up any overflow with a paper towel.
After cleaning out the liquid, reinstall the cover on the bottom. During this process, always ensure that all parts are aligned correctly.
Before using the Bar IGET, we want to let the e-liquid sit for 5 to 10 minutes. This helps the coils and cotton to be fully saturated, thus preventing dry hits.
Once the coils and cotton are fully saturated, we can immediately start the device and enjoy a delicious vape journey.
IGET Bar Refill Do’s And Don’ts
Filling a vape can be a technically challenging and risky endeavour for both beginners and experienced vape users.
So, here are some of the precautions when we still need to understand.
How To Refill IGET Bar Online Reddit?
In addition to the 7 filling steps provided above, we’ve also taken to the Reddit forums to gather feedback and opinions from vape users on filling the IGET Bars. Let’s take a look at it next!
How Do You Determine Whether The IGET Vape Bar Is Empty?
Determining when the IGET Vape Bar is running out helps us to have an enjoyable and smooth vape experience.
Since this device is not designed with a transparent casing, we can’t visually see how much vape juice is left.
However, it will clearly send out the following 6 signals when the IGET 3500 puffs are about to run out.
- The indicator light at the bottom is blue and blinks 5-10 times, which means the e-liquid level is low currently.
- The device has been activated, but the inhalable vapour is low, or there is no vapour output at all.
- The colour of the cotton core is yellowish or even white.
- E-liquid flavour changes or has a burnt taste.
- Vape gurgles when inhaling.
- The throat hit felt lighter than before.
For an in-depth look at when the IGET 3500 runs out, the following article is a good reference:
How To Choose The Right Liquid To Refill IGET Bars?
The vape experience is crucial for you to choose the right liquid to fill your IGET Puff Bar. With that in mind, here are 4 different types of e-liquids for you to choose from:
E-liquid Type | Vaping Experience |
---|---|
70 PG / 30 VG E-liquid | Low vapour output, strong throat irritation, strong flavour |
50 PG / 50 VG E-liquid | Vapour volume and vape favours are balanced |
70 VG / 30 PG E-liquid | Average vapour output, less throat irritation |
80 VG / 20 PG E-liquid | The vapour is thick and dense, great for vapour chaser |
How To Open An IGET Bar?
Generally speaking, we do not recommend opening the IGET Bar Vape. It is a disposable vape, and if you force the device to open it, you may cause serious damage to it.
But because of this, vape users are even more curious about its inner workings.
So, to satisfy the public’s demand, we have provided a detailed step-by-step guide to open the vape safely and easily:
- Before taking apart the vape, prepare a Bar IGET device, a pair of pliers and several clean paper towels.
- Squeeze the bottom of the device with the pliers.
- Pull the bottom cover back and forth for a while until you can see the internal parts.
- Slowly remove the battery and tank with the tip of the pliers.
- Put all the parts back in their original position and assemble the device.
If you would like further details on how to open the IGET Vape Bar and would like to know how to open the IGET Vape Bar 3500 puffs without pliers, please click on the link below for a comprehensive read:
How To Recharge IGET Bar 3500 At Home?
The first thing that is clear is that we do not recommend opening the IGET 3500 to recharge it.
However, to satisfy the curiosity of vape enthusiasts, this blog will provide brief steps on how to charge the Bar Vapes at home on Android and Samsung chargers.
- Open the IGET Vape Bar by squeezing the bottom cover with pliers.
- Gently remove the battery.
- Unplug the Android and Samsung chargers and cut one end of the charging cable with scissors.
- Connect the red wire to the positive terminal of the battery and the blue wire to the negative terminal.
- Charge the battery 4-5 times for about 1-2 minutes each time.
- Once charging is complete, reassemble your vape. Re-check the liquid for leakage and the battery for overheating.
For more information on charging the I GET Bar, click on the following article to read it:
Also, in addition to the content provided above for charging the IGET 3500, we’ve collected some Reddit user reviews to provide vape users with more ideas.
However, after some attempts, the IGET 3500 puffs are still not rechargeable.
It is recommended that you change to an IGET Plus device. They do not require maintenance and charging, so you can easily enjoy the fun of vaping a pod vape.
How To Open IGET Bar Plus?
The pods of the Bar Plus are attached to the battery base by a magnetic contact.
So, if you want to open the IGET Plus device, hold the pod in your hand and pull it out with a firm grip, and its pod will instantly detach from the device.
The whole process takes less than 2 seconds to complete. This is very newbie-friendly.
Once you have opened the Bar Plus, if you find any leakage or damage to the device, it is recommended that you replace the entire pod to prevent any accidents.
How To Refill IGET Bar Plus Pod?
The Bar Plus Pod is an all-in-one design and does not have a place where you can fill it with vape juice.
As a result, it can be difficult to operate for both novice and experienced vape users.
- Prepare a bottle of e-liquid and a drill.
- Drill a small hole in the joint between the mouthpiece and the pod.
- Stick the tip of the e-liquid bottle into the hole and squeeze.
- Slowly fill the pod three-quarters of the way with e-liquid.
- Once filled, plug the hole with wood chips or rubber to prevent leakage.
- Allow the liquid to sit for 5-10 minutes before plugging it back into the Bar Plus device.
Each Bar Plus Pod has a 16 ml capacity, which means you can fill it about 3 times from a 50 ml bottle of e-liquid.
Verdict
Again, this guide is for reference only. We do not recommend that you open the Bar IGET to fill it.
While the Bar IGET filling process is not complicated, wouldn’t it be easier and less time-consuming to purchase a new device?
At our IGET Bar Vape Shop, all orders over $100 receive free shipping and free 24-hour tracked shipping!
FAQ About How To Refill IGET Bar
How do I get my IGET Bar to work again?
Here are 6 methods to bring your vape back from the dead:
- Use a cotton swab to remove any blockage in the mouthpiece or air inlet.
- Keep the IGET 3500 in a ventilated, dry place out of direct sunlight.
- Extend and control the duration of each puff.
- Place the device upright or horizontally.
- Charge your vape with a DIY charging cable.
- Fill with new e-liquid.
For more detailed information about the IGET Vape Bar not working, please read the following guide:
Is it possible to refill a disposable vape?
Disposable vapes are not designed to be refilled with vape juice. They are pre-filled with a certain amount of liquid.
When the liquid runs out, the vape reaches the end of its useful life.
If you try to refill a disposable vape with e-liquid, there is a good chance that you will cause damage to the device.
How do you make a disposable vape work after it dies?
When a disposable vape runs out of e-liquid or batteries, the device is no longer of any use.
At this point, we should purchase a new device. Continuing to use an old or damaged device will potentially pose a risk to your safety.